[Marcy Jones]

I made my own pump using clear plastic food storage containers, I bought 2, 6" diameter tubs and drilled holes in the bottom side to attach barbed nylon fitting that 1/4 " plastic hose would attach joined the two with a T fitting that had a single hose with an air check valve so air would only suck out of the device. I just use my own lung power to provide the vacuum. To get the vacuum going place device on a chair kneel over the cylinders placing chest with lots of lotion for sealing the rims and suck, or if you can find a vacuum pump to work it is easier. careful not to suck too hard or bruising may occur.